Fibre 3 Contact Fire Staff - 150cm (5ft)

Rating:
96%
As low as £64.00
Only 3 left!
Ultra-strong, momentum rich, full fibreglass core, 150cm long, pro contact fire staff with large wicks. Sporting either our new silicone grips or old school padded ones.

The Fibre 3 Contact Fire Staff is the 3rd generation of our ultra-strong pure fibreglass core fire staffs. The Fibre 3 range has been specifically designed to be used as contact staffs. The fiberglass core is heavy, resulting in an outstanding amount of momentum. This means that the Fibre 3s continue to rotate, and feel like they're stuck to you, even at slow speeds. 

The 150cm version is a fantastic staff for single contact. The long length amplifies the weight at the ends to give it an astonishing amount of momentum - many experienced contact staffers prefer these longer lengths for that reason. However, the 150cm is starting to get a bit long for doubles, unless you're quite tall and strong.

The Fibre 3s have a number of innovative features:

- The fibreglass core is so strong that these staffs are virtually indestructible. Fibreglass also doesn't conduct heat well meaning the shaft will not get hot, even after repeated burns. The discreet flex provided by the core is firm enough to not hinder play but it can still absorb shock from the highest throws.

- Aluminium heat shields and bash guards cover 37.5cm of either end of the staff. These help to concentrate weight at the extremities adding momentum and fluidity to the staff.

- The 150cm model comes equipped with two whopping burners each made from 80cm of 100mm wide wick, considerably more than most other brands of fire staff. The large wicks guarantee long lasting and consistent burns and add further weight to the ends of the staff providing yet more momentum.

- There are two types of grip available on the Fibre 3s; silicone or cushion grip:

The silicone grip provides a huge amount of friction and is fused to the core with a heat and fuel proof silicone adhesive. The silicone grip also comes marked with a centre point and two other handy points equidistant from the centre. These two marks are usefully positioned at the areas you would hold the staff for entry into moves like the SNES or Matrix.

The cushion grip is the same padded grip we use on our aluminium staffs, only twice the length. This gives a large area of friction that will forgive those little inaccuracies. The cushion grip performs slightly better than the silicone in wet conditions and is easily re-gripped. Unfortunately the extra cost of this quality grip means the staff is slightly more expensive than its silicone counterpart.

- Most other, non-Firetoys, staffs have a limited lifespan as the wicks are secured with screws that eventually wear away the core. The bolts we use to attach the wick to the shaft go right through the entire burner and screw into each other ensuring the wicks are tightly secured and easy to replace. The biggest advantage these bolts give our staffs over others on the market is that they won't cause deterioration to the core during re-wicking as they screw into each other and not the core. This greatly increases the life of our fire staffs.

The Fibre 3 Contact Fire Staffs have been tried and tested by many awesome contact staffers who have provided feedback resulting in the work horse of a staff you see before you. The Fibre 3s are hugely popular and have become a favourite among contact staff spinners in the UK and internationally. Have a look at this contact staff performance for inspiration.

New to contact staff? Check out this instructional book on the basics.

All our own props are manufactured in our sustainably powered, 1700 square foot workshop.

More Information
ManufacturerFiretoys
Country of ManufactureUK
LevelIntermediate/Advanced
Length150cm (5ft)
Weight1095g
Amount of Wick (per burner)80cm x 100mm
Shaft Diameter19mm
Staff Spinning StyleSingle Spinning, Contact
Write Your Own Review
You're reviewing:Fibre 3 Contact Fire Staff - 150cm (5ft)
Your Rating

Accessories

Check items to add to the cart or
All text, images and animations are copyright © 2019 Firetoys Ltd | Registered in England No: 4621720 | VAT: 824 931 032