This bundle includes one HyperSpin TC Triple Bearing Diabolo (choose your colour from the menu) and a pair of HyperSpin Chameleon LED Kits. Some assembly is required and diabolo sticks are NOT included.
HyperSpin TC Triple Bearing Diabolo
The HyperSpin TC diabolo is made in Taiwan from the highest quality components and features an extremely fast triple bearing axle system.
The HyperSpin diabolo is made with performance in mind; not only does it boast one of the fastest triple bearing axles we've seen but, apart from the softer outer rim, the cup and hub are actually one piece which reduces the friction from the string and stick to an absolute minimum. All of these features make the HyperSpin TC possibly the longest spinning diabolo out there and has outperformed many of the top brands in spin tests.
The HyperSpin TC is also a great looking diabolo. The TC and T models are identical except for their appearance. This model, the TC, has a translucent coloured outer rim, whereas the the T's outer rim is an opaque colour. These differences do not affect the diabolos' performance but it does mean the HyperSpin TC is more suitable for the HyperSpin LED kit (included in this bundle). The translucent rims let the light from the LEDs shine through which makes for a more striking effect than with the HyperSpin Ts.
Please note this diabolo does NOT come with sticks.
HyperSpin Chameleon LED Kit
This glow diabolo kit is one of the brightest we've seen. Check out the video below to see the HyperSpin glow diabolos in action.
Supplied with three RGB LEDs on each unit you can switch between the following modes with a push of the central button:
1) Solid red
2) Solid green
3) Solid blue
4) Solid pink
5) Solid orange
6) Solid turquoise
7) RGB (the LEDs are on different levels so you get 3 concentric circles of red, green, blue)
8) Same as 7) but flashing
9) Slow change
That button also turns the LEDs on and off. You need to press and hold the button to turn the kits on. This stops you accidentally turning the lights on in your bag and wasting battery power.
The HyperSpin LED kits are powered by 2x CR2032 batteries (so you'll need 4 to power the pair). Batteries are included but you can buy spares here.
These glow kits fit onto the end of the diabolo's axle. You'll need to remove the nut from each end of the diabolo using basic tools. You can then hand tighten the LED kits in place. It's worth regularly checking the kits are still secure.
Adding the LED units to HyperSpin diabolos raises their weight from 254g to 294g.